ZSNES board

Well yeah. As said, I'm using an ArcadeVGA which natively supports various Arcade and Console Resolutions. The Problem is, for some reason the cards has a vertical minimum of 240 lines, and afaik the SNES only uses 224 lines. However, my problem is quite easy. I've set up a custom resolution of 512x...

Actually I'm using 2 Keyboard Encoders (one at PS2, the other on USB) and it works as long as all Players use different Keys, as all Keyboards in the system are being joined to one (DirectInput) Device.

It may be possible under Linux, but then I'm quite sure this would need another hack to the code.

Hi. As I've seen the newer WIP builds feature custom resolutions (at last), but sadly none with fixed aspect ratio. See I'm running my SNES Emulation on an ArcadeVGA Card in 512x240 Pixels and the image gets stretched verticaly. I can work around the stretch if i enable 25% scanlines, although the p...

I would like to have an 'continous' Screenshot feature so i could take small (say 10sec) 'clips' of my games.

Even cooler would be if you could skip any 2nd Frame so i get 30 screenshots / sec in NTSC games.

@Murdock: using the original arcade monitor with an 'ArcadeVGA' which outputs 15khz.

@MaxST: actually directx lists a load of resolutions over here (about 20 'below' 640x480)

Heya folks, I'm running ZSNES on my modified Arcade Cab and would need some more 'classic' Resolutions (most likely 321x240 [NO TYPO! :)] or at least something more 'low' than 640x480. Don't know why but selecting 256x224 (was is the lowest possible fullscreen res) seems to switch to 640x480 with an...