Controller acting weird
Moderator: ZSNES Mods
Controller acting weird
Hi to all, and first of all, sorry about my english, because I'm from Spain.
I have a Genius Maxfire Digital Force G-09D, I use WinXP and the problem is that when I try to play using the pad, after configuration and all, the character moves like crazy, even if I'm not touching the pad! I have been said that this happens when the pad isn't one that can be connected to an USB port, but I was hoping a solution.
Does anyone know about this? Thanks for reading anyway
I have a Genius Maxfire Digital Force G-09D, I use WinXP and the problem is that when I try to play using the pad, after configuration and all, the character moves like crazy, even if I'm not touching the pad! I have been said that this happens when the pad isn't one that can be connected to an USB port, but I was hoping a solution.
Does anyone know about this? Thanks for reading anyway
-
- Devil's Advocate
- Posts: 2293
- Joined: Mon Aug 02, 2004 7:51 pm
- Location: Hmo. Son.
-
- ZSNES Shake Shake Prinny
- Posts: 5632
- Joined: Wed Jul 28, 2004 4:15 pm
- Location: PAL50, dood !
This step is delicate.Joe Camacho wrote:Try centering the pad's throttle.
Go to Config->Input #1.
Choose Keyb/Joystick, press Set. Then press set Keys. If all the keys become the same thing like 'J014', then the throttle isn't centered properly.
Once you got it centered, click set keys and configure your pad for real.
皆黙って俺について来い!!
Pantheon: Gideon Zhi | CaitSith2 | Nach | kode54
Code: Select all
<jmr> bsnes has the most accurate wiki page but it takes forever to load (or something)
-
- Hero of Time
- Posts: 2646
- Joined: Fri Jul 30, 2004 2:49 am
- Location: In front of the monitor
- Contact:
Well, make sure you're using the latest WIP version.
-
- Devil's Advocate
- Posts: 2293
- Joined: Mon Aug 02, 2004 7:51 pm
- Location: Hmo. Son.