Windows 7 screensaver not working...wireless interference?

Place to talk about all that new hardware and decaying software you have.

Moderator: General Mods

nintendo_nerd
Sir Robin the Not-Quite-So-Brave-As-Sir-Lancelot
Posts: 446
Joined: Mon May 11, 2009 4:44 am
Location: USA
Contact:

Windows 7 screensaver not working...wireless interference?

Post by nintendo_nerd »

So, about a month or so ago, Windows 7 Home Premium's screensaver was working fine and dandy like sour candy. Standby mode used to work, too, until about two weeks ago. Based on what I've found on google, there are a few reasons that can cause the screensaver to freak out, wireless keyboards and/or mice. I recently got a Microsoft Wireless Keyboard 1000, and I noticed people reported their screensaver no longer working properly (with this and other similar devices). The screensaver will either A)go on after the set amount of time and go into standby normally, B)go on after the set amount of time, almost go into standby mode only to cancel and show the desktop. Or C) It will go to both screensaver and standby and then go back to the desktop. I've tried numberless combinations of time, screensaver modes (3D text, mystify, etc), and power settings (1, 2, 3, 10, 15 minutes) and still, it freaks out. I've even go into the keyboard settings in the control panel in hopes of finding some setting that's conflicting, and I didn't find anything there, either (and yes, the drivers are the most up to date). This constant screensaver/power mode going off and on can't be good the monitor. Lengthy post, I know, aren't there any programs out there that can force the screensaver to go on, or somehow override the wireless conflicts?
"Just because I don't LISTEN doesn't mean I don't CARE!" -Homer Simpson
Killa B
♥ Love Freak FlonneZilla ♥
Posts: 111
Joined: Sun Apr 01, 2007 12:59 am
Location: USA
Contact:

Post by Killa B »

You sure have a lot of computer problems.
User Error: Please replace user
nintendo_nerd
Sir Robin the Not-Quite-So-Brave-As-Sir-Lancelot
Posts: 446
Joined: Mon May 11, 2009 4:44 am
Location: USA
Contact:

Post by nintendo_nerd »

So what if I do?
"Just because I don't LISTEN doesn't mean I don't CARE!" -Homer Simpson
Gil_Hamilton
Buzzkill Gil
Posts: 4294
Joined: Wed Jan 12, 2005 7:14 pm

Post by Gil_Hamilton »

Well, past a certain point we assume it's a PEBCAK or ID-10-T error.
Squall_Leonhart wrote:
You have your 2s, 4s, 8s, 16s, 32s, 64s, and 128s(crash course in binary counting!). But no 1s.
DirectInput represents all bits, not just powers of 2 in an axis.
KHDownloads
franpa
Gecko snack
Posts: 2374
Joined: Sun Aug 21, 2005 11:06 am
Location: Australia, QLD
Contact:

Post by franpa »

Try the BIOS, I remember old ones letting you adjust what wakes the computer from standby/hibernation in there.
Core i7 920 @ 2.66GHZ | ASUS P6T Motherboard | 8GB DDR3 1600 RAM | Gigabyte Geforce 760 4GB | Windows 10 Pro x64
funkyass
"God"
Posts: 1128
Joined: Tue Jul 27, 2004 11:24 pm

Post by funkyass »

you could just turn off the monitor...

basically this error can't be corrected without replacing the user.
Does [Kevin] Smith masturbate with steel wool too?

- Yes, but don’t change the subject.
Deathlike2
ZSNES Developer
ZSNES Developer
Posts: 6747
Joined: Tue Dec 28, 2004 6:47 am

Post by Deathlike2 »

99% it's a lot of other background stuff you're doing that's interfering with it.

Then again, only you magically have these issues.
Continuing [url=http://slickproductions.org/forum/index.php?board=13.0]FF4[/url] Research...
adventure_of_link
Locksmith of Hyrule
Posts: 3634
Joined: Sun Aug 08, 2004 7:49 am
Location: 255.255.255.255
Contact:

Post by adventure_of_link »

Image


sorry, but when it comes to NN and tech talk threads: nintendo_nerd + tech talk + post a thread with questions there + either chickening out from the suggestions and/or he's the only one with the issue = double facepalm.
<Nach> so why don't the two of you get your own room and leave us alone with this stupidity of yours?
NSRT here.
Gil_Hamilton
Buzzkill Gil
Posts: 4294
Joined: Wed Jan 12, 2005 7:14 pm

Post by Gil_Hamilton »

One for AoL, one for Nintendo_Nerd.
Squall_Leonhart wrote:
You have your 2s, 4s, 8s, 16s, 32s, 64s, and 128s(crash course in binary counting!). But no 1s.
DirectInput represents all bits, not just powers of 2 in an axis.
KHDownloads
grinvader
ZSNES Shake Shake Prinny
Posts: 5632
Joined: Wed Jul 28, 2004 4:15 pm
Location: PAL50, dood !

Post by grinvader »

It's funny how i didn't read your wall of text


it is
皆黙って俺について来い!!

Code: Select all

<jmr> bsnes has the most accurate wiki page but it takes forever to load (or something)
Pantheon: Gideon Zhi | CaitSith2 | Nach | kode54
adventure_of_link
Locksmith of Hyrule
Posts: 3634
Joined: Sun Aug 08, 2004 7:49 am
Location: 255.255.255.255
Contact:

Post by adventure_of_link »

Gil_Hamilton wrote:One for AoL, one for Nintendo_Nerd.
Not necessarily... this one can be mostly be directed to nintendo_nerd here. go ahead, search his thread history in this forum. over 95% of his threads in this forum, either he was the only one with the problem (or one of the VERY FEW), and/or he chickened out of everyone else's suggestions.

on another note, what is up with your hate towards me as of late?
<Nach> so why don't the two of you get your own room and leave us alone with this stupidity of yours?
NSRT here.
funkyass
"God"
Posts: 1128
Joined: Tue Jul 27, 2004 11:24 pm

Post by funkyass »

Gil_Hamilton wrote:One for AoL, one for Nintendo_Nerd.
QFT! QFW!
Does [Kevin] Smith masturbate with steel wool too?

- Yes, but don’t change the subject.
adventure_of_link
Locksmith of Hyrule
Posts: 3634
Joined: Sun Aug 08, 2004 7:49 am
Location: 255.255.255.255
Contact:

Post by adventure_of_link »

funkyass wrote:
Gil_Hamilton wrote:One for AoL, one for Nintendo_Nerd.
QFT! QFW!
And the shitstorm continues... :roll:

honestly do you people have anything better to do?

that being said, this can describe over 90% of you:

Image
<Nach> so why don't the two of you get your own room and leave us alone with this stupidity of yours?
NSRT here.
Gil_Hamilton
Buzzkill Gil
Posts: 4294
Joined: Wed Jan 12, 2005 7:14 pm

Post by Gil_Hamilton »

adventure_of_link wrote: on another note, what is up with your hate towards me as of late?
No hatred. That would require me to care more than I really do.

I'm just mocking the big hissyfit you threw in the other thread that you locked when it went south for you. That's all.
Squall_Leonhart wrote:
You have your 2s, 4s, 8s, 16s, 32s, 64s, and 128s(crash course in binary counting!). But no 1s.
DirectInput represents all bits, not just powers of 2 in an axis.
KHDownloads
odditude
Official tech support dood
Posts: 2120
Joined: Wed Jan 25, 2006 7:57 am

Re: Windows 7 screensaver not working...wireless interferenc

Post by odditude »

nintendo_nerd wrote:So, about a month or so ago, Windows 7 Home Premium's screensaver was working fine and dandy like sour candy. Standby mode used to work, too, until about two weeks ago.
so what changed?

cause-and-effect is a concept you need to get into your head. you have the effect; find the cause.
nintendo_nerd wrote:wireless interference
move the offending device(s) away from the wireless receiver (or vice-versa).

unfortunately, both of these suggestions involve trial and error, which devolves into just "error" if you don't know what you're trying to do.
Last edited by odditude on Wed Dec 16, 2009 7:12 pm, edited 1 time in total.
Why yes, my shift key *IS* broken.
Deathlike2
ZSNES Developer
ZSNES Developer
Posts: 6747
Joined: Tue Dec 28, 2004 6:47 am

Re: Windows 7 screensaver not working...wireless interferenc

Post by Deathlike2 »

odditude wrote:just "error"
Continuing [url=http://slickproductions.org/forum/index.php?board=13.0]FF4[/url] Research...
grinvader
ZSNES Shake Shake Prinny
Posts: 5632
Joined: Wed Jul 28, 2004 4:15 pm
Location: PAL50, dood !

Re: Windows 7 screensaver not working...wireless interferenc

Post by grinvader »

nintendo_nerd wrote:I AM ERROR
</deadhorseUPPERCUT>
皆黙って俺について来い!!

Code: Select all

<jmr> bsnes has the most accurate wiki page but it takes forever to load (or something)
Pantheon: Gideon Zhi | CaitSith2 | Nach | kode54
odditude
Official tech support dood
Posts: 2120
Joined: Wed Jan 25, 2006 7:57 am

Re: Windows 7 screensaver not working...wireless interferenc

Post by odditude »

grinvader wrote:</deadhorseUPPERCUT>
trollryuken!
Why yes, my shift key *IS* broken.
adventure_of_link
Locksmith of Hyrule
Posts: 3634
Joined: Sun Aug 08, 2004 7:49 am
Location: 255.255.255.255
Contact:

Post by adventure_of_link »

Gil_Hamilton wrote:
adventure_of_link wrote: on another note, what is up with your hate towards me as of late?
No hatred. That would require me to care more than I really do.

I'm just mocking the big hissyfit you threw in the other thread that you locked when it went south for you. That's all.
Alright then.

either way, if this is what you were talking about, nintendo_nerd requested it... so meh. last time I'm ever bailing his ass out...
<Nach> so why don't the two of you get your own room and leave us alone with this stupidity of yours?
NSRT here.
grinvader
ZSNES Shake Shake Prinny
Posts: 5632
Joined: Wed Jul 28, 2004 4:15 pm
Location: PAL50, dood !

Re: Windows 7 screensaver not working...wireless interferenc

Post by grinvader »

odditude wrote:
grinvader wrote:</deadhorseUPPERCUT>
trollryuken!
shouldn't that be shoutrollken

i mean, rising troll fist or troll dragon fist ?
皆黙って俺について来い!!

Code: Select all

<jmr> bsnes has the most accurate wiki page but it takes forever to load (or something)
Pantheon: Gideon Zhi | CaitSith2 | Nach | kode54
Deathlike2
ZSNES Developer
ZSNES Developer
Posts: 6747
Joined: Tue Dec 28, 2004 6:47 am

Re: Windows 7 screensaver not working...wireless interferenc

Post by Deathlike2 »

grinvader wrote:
odditude wrote:
grinvader wrote:</deadhorseUPPERCUT>
trollryuken!
shouldn't that be shoutrollken

i mean, rising troll fist or troll dragon fist ?
Former sounds better.
Continuing [url=http://slickproductions.org/forum/index.php?board=13.0]FF4[/url] Research...
odditude
Official tech support dood
Posts: 2120
Joined: Wed Jan 25, 2006 7:57 am

Re: Windows 7 screensaver not working...wireless interferenc

Post by odditude »

grinvader wrote:
odditude wrote:
grinvader wrote:</deadhorseUPPERCUT>
trollryuken!
shouldn't that be shoutrollken

i mean, rising troll fist or troll dragon fist ?
shoutrollken is more proper in meaning, but...

trollryuken in grungy cps1 ryu/ken-speak? flawless.
Why yes, my shift key *IS* broken.
I.S.T.
Zealot
Posts: 1325
Joined: Tue Nov 27, 2007 7:03 am

Post by I.S.T. »

Troll Dragon Fist ftw.
nintendo_nerd
Sir Robin the Not-Quite-So-Brave-As-Sir-Lancelot
Posts: 446
Joined: Mon May 11, 2009 4:44 am
Location: USA
Contact:

Post by nintendo_nerd »

Oy gevalt.... I believe it may be working now, but nonetheless, I'll bite the bullet and lay off until I've done extensive research before posting an issue from here on out. This is something that I've been thinking about for a while and you're all right. I admit that I'm not following advice and chickening out, and I most likely deserved to be eviscerated for being the way I am.
Last edited by nintendo_nerd on Wed Dec 16, 2009 11:57 pm, edited 1 time in total.
"Just because I don't LISTEN doesn't mean I don't CARE!" -Homer Simpson
grinvader
ZSNES Shake Shake Prinny
Posts: 5632
Joined: Wed Jul 28, 2004 4:15 pm
Location: PAL50, dood !

Post by grinvader »

nintendo_nerd wrote:we all
hahahahahahahaha

oh wow

hahahaha

haha


no
皆黙って俺について来い!!

Code: Select all

<jmr> bsnes has the most accurate wiki page but it takes forever to load (or something)
Pantheon: Gideon Zhi | CaitSith2 | Nach | kode54
Post Reply