Hello Guys,
I am currently trying to develop a Snes cart.
not a flash cart, just a regular cart
The only thing i need is to find a chip that will work like the MAD-1 Chip.
I have found the super CIC source code and Chip model that will work with a snes cart.
But the only thing i found about the MAD-1 is the pin out.
anybody knows a chip similar to the MAD-1 (Memory Address Decoder revision 1) to do the memory mapping for the snes games to save in a battery with a 64kb sram.
Anyone?
Please help I know I just joined, but is because I found this forum looking for this information (there were some posts about MAD1 chip and cart development)
Thanks!
Questions About MAD 1 Chip
Moderator: ZSNES Mods
-
grinvader
- ZSNES Shake Shake Prinny
- Posts: 5632
- Joined: Wed Jul 28, 2004 4:15 pm
- Location: PAL50, dood !
Re: Questions About MAD 1 Chip
The easiest is to grab another snes cart with a mad-1 and transfer it over to yours, frankenstein style.
I don't know much about alternatives for that sort of stuff.
I don't know much about alternatives for that sort of stuff.
皆黙って俺について来い！！
Pantheon: Gideon Zhi | CaitSith2 | Nach | kode54
Code: Select all
<jmr> bsnes has the most accurate wiki page but it takes forever to load (or something)-
badinsults
- "Your thread will be crushed."
- Posts: 1236
- Joined: Wed Jul 28, 2004 1:49 am
- Location: Not in Winnipeg
- Contact:
Re: Questions About MAD 1 Chip
Your best bet is probably to ask on the NESDev board.
http://nesdev.parodius.com/bbs/viewtopi ... e124b0aa3f
http://nesdev.parodius.com/bbs/viewtopi ... e124b0aa3f
<pagefault> i'd break up with my wife if she said FF8 was awesome