ZSNES board

For some reason games like Air Zonk, Super Star Soldier and Raiden have a proplem where the sprite that you control goes to the left and it shakes and can't be controlled. Ordyne resets itself after you start.

Windows 7 64-bits
Intel i7 920
ATI Sappire Radeon HD 4860
6GB DDR3 RAM

Does he clean hotel rooms or something? Close, he does housekeeping at a hospital. Apparently someone must've left a DS out of nowhere, tried to find who it belonged to, and gave up -shrug- Thanks again Kode for the suggestion of AK2 on ZSNES IRC. Looks like good stuff from what you and the site to...

Does he clean hotel rooms or something? Close, he does housekeeping at a hospital. Apparently someone must've left a DS out of nowhere, tried to find who it belonged to, and gave up -shrug- Thanks again Kode for the suggestion of AK2 on ZSNES IRC. Looks like good stuff from what you and the site to...

Yep! I had one just like that with the urine color. Too bad that it got completely damaged in hurricane George because water filtered on the closet's wall. I should had put it under the sun for a longer time before turning it on...

The low scored White Knight Chronicles that even if it scored very low I enjoy this more than FFXII even with it's cliche story and Oath of Felghana.

I put my PC to sleep and when I logged in and ran HMP now I see the CPU TIN at 35.5c and the cores around 43c. The temperature outside is 23c. I'm relieved for now. Thank You all for the help. *EDIT* I forgot to say that my GPU Temp is 53c and it's only 1 card. I won't put the other video card until...

I know that there is a list on Wikipedia on Super Gameboy games. The box have the icon on them. Donkey Kong was one of them.

Give Shadow Hearts and Shadow Hearts Covenant a try. These games are very underrated.

I updated the BIOS of the P6T and When I used PC Probe II the CPU at 50c and it gave me an alert of the casing fans stopping. I opened up the case and they where running so when I closed the case I opened HW Monitor Pro and the CPU TIN is at 51c and the cores are all around 43c... Then I opened PC W...

Very well said. Ys are just Action Adventure RPGs on Steroids and they don't have anything that resembles Zelda except being Action Adventure like with the difference that Ys games are RPGs. Thank you for verbosely adding nothing to the conversation. Thank You for being a smart ass! Your response i...

Very well said. Ys are just Action Adventure RPGs on Steroids and they don't have anything that resembles Zelda except being Action Adventure like with the difference that Ys games are RPGs.

Yes it is the ASUS P6T board (not deluxe). Right now CPUID Hardware Monitor shows the same result as the first time with the Tin hotter than the cores and ASUS Probe II shows 50c all the time. With the time I will have to replace the V8 with a Titan Fenrir who is supposed to be superior.

In my case the temperature outside is 25c and 78f and this is only on Winter-Spring time. i don't want to know what will happen in summer with a temp of 85-92F. What? CPUTIN is now 33.5c and cores are around 43c WTF?

Do you think that's because I added too much thermal paste?

Well the cores are around 40c and the CPUTIN around 50c and the CPU fan is rotating at 1687 RPM according to CPUID Hardware Monitor Pro and according to the ASUS PC Probe II the CPU temperature is 51c. I wonder if I'm ok and BTW the thermal paste is MX-3.

I can't lower my i7 below 48c - 53c and I have a V8 installed. I hope it is not defective...

I hope that the V8 fan is not defective because it is noisy if sent to maximum. CPU temp is around 48 grades...

He could also try the combo that comes with the Cooler Master Storm Scout on newegg.com

you probably did it rong then the spacing between pcie slots is standardized just for that feature accross mobo, and the tabs are all the same (given you have the same gfx card x2/3) Yes but when I tried to insert one of the bridge connectors it won't fit on the card's connector because it is too s...

funkyass wrote:how can the crossfire bridge that comes with the card not fit on it?

Neither card came with a bridge. I tried to use the one that came with the motherboard.

I mounted the PC and at first it didn't boot and made a beep followed by a long pause and then a beep. I connected a missing molex of the rear fan and readjusted the graphic card and the 3 memory dims. Now everything works fine. I installed Windows 7 64 bits to see how it runs and it works so far ex...

The newegg combo came with 2 Sapphire Radeon HD 4860 but it also came with just a 600W Power Supply. I don't think it should be wise to Crossfire both cards for some reason.

Agreed! Please don't contaminate my thread any further! Anyway I decided to wait 3 more days and if the MX-3 don't arrive, I'll build the machine. In the mean time I fill the rebates if I can find them. you need to test the machine ASAP. you generally can't return defective products if you've alrea...

Agreed! Please don't contaminate my thread any further! Anyway I decided to wait 3 more days and if the MX-3 don't arrive, I'll build the machine. In the mean time I fill the rebates if I can find them.

I better wait for everlasting ebay then. Too much risk for an amateur like me.