Input configuration bug

Saten · Post by **Saten** » Mon Jul 25, 2005 4:42 am

Zsnes vpre 1.43 July 10 2005 Win input bug:

It is impossible to customise buttons for any input when they are set to "None". You have to set them to the default "Keyb/Joystick" before doing any change or it won't work (neither by clicking a key nor the "Set Keys" button). It never happened in v1.36.

Noxious Ninja · Post by **Noxious Ninja** » Mon Jul 25, 2005 4:59 am

I think that's how it's supposed to be now.

Gil_Hamilton · Post by **Gil_Hamilton** » Mon Jul 25, 2005 6:00 am

Saten wrote:Zsnes vpre 1.43 July 10 2005 Win input bug:

It is impossible to customise buttons for any input when they are set to "None". You have to set them to the default "Keyb/Joystick" before doing any change or it won't work (neither by clicking a key nor the "Set Keys" button). It never happened in v1.36.

You're complaining because you can't set controls for a disabled input?

Given that under the old behavior, ZSNES reset the controls when you changed from none to keyb/joystick, this is merely the removing of a useless feature.

CyberBotX · Post by **CyberBotX** » Mon Jul 25, 2005 6:18 am

I don't remember where, but I did see somewhere, possibly on these boards and possibly from Nach, that they did that on purpose. Like Gil_Hamilton said, you're complaining over not being able to set controls for disabled input? Set it to keyboard/joystick first and then set your keys. Plain and simple.

Richard C. · Post by **Richard C.** » Mon Jul 25, 2005 6:19 am

he's not complaining. he's reporting something he thought was a bug. calm down.

Saten · Post by **Saten** » Mon Jul 25, 2005 6:56 am

At first I didn’t thought of setting the input to Keyb/Joystick because I never use default buttons. In older versions you never had to do that. I didn’t know it was changed on purpose. I really thought it was a bug.

Gil_Hamilton · Post by **Gil_Hamilton** » Wed Jul 27, 2005 3:29 am

Saten wrote:At first I didn’t thought of setting the input to Keyb/Joystick because I never use default buttons. In older versions you never had to do that.

Actually, you did.
If you didn't, the controls didn't work, because you configured a "disconnected pad. " And ZSNES reset the controls when you changed to keyb/joystick.

Spoony · Post by **Spoony** » Wed Jul 27, 2005 4:09 am

Gil_Hamilton wrote:Actually, you did.
If you didn't, the controls didn't work, because you configured a "disconnected pad. " And ZSNES reset the controls when you changed to keyb/joystick.

No, really, it worked fine if you left it at none. It did reset them when you changed your selection, though.

Saten · Post by **Saten** » Wed Jul 27, 2005 10:48 pm

I think it would be more useful if there was a “Plugged” check box so we would just have to uncheck this box to disconnect the controller. Many emulators already have this option.

ZSNES board

Input configuration bug

Input configuration bug

Re: Input configuration bug