Xbox360 wired controller help
Moderator: ZSNES Mods
Xbox360 wired controller help
I am currently using version version 1.51. If I do not have my Xbox controller plugged in and hit set keys, then I can set the keys with no problem on the keyboard. However, if I try to set the keys to my controller, ZSNES just freezes. I use Windows 7. Also, if I use other emulators, I can connect my controller without hassle, so it is not the controller. Any help would be appreciated.
-
- Inmate
- Posts: 1751
- Joined: Mon Dec 06, 2004 7:47 am
- Location: WA
-
- ZSNES Developer
- Posts: 6747
- Joined: Tue Dec 28, 2004 6:47 am
-
- ZSNES Developer
- Posts: 6747
- Joined: Tue Dec 28, 2004 6:47 am
does it show up under Control Panel\Hardware and Sound\Devices and Printers? does it work there?
[url=http://www.alexchiu.com/affiliates/clickthru.cgi?id=phonymike]ultimate immortality[/url]
[url=http://www.sloganizer.net/en/][img]http://www.sloganizer.net/en/image,zsnes,white,purple.png[/img][/url]
[url=http://www.sloganizer.net/en/][img]http://www.sloganizer.net/en/image,zsnes,white,purple.png[/img][/url]
-
- New Member
- Posts: 2
- Joined: Sun May 21, 2017 5:28 pm
Re: Xbox360 wired controller help
It's happening to me and not even "press esc for skip" unfreezes it.
All other apps and emulators work fine with controller.
edit: as Ichinisan suggested, I went to windows control panel to check if all the axis were centered. In fact in one of the controllers it wasn't. So I adjusted it and started zsnes again and it worked. That's the solution. The next day didn't work again, but I just had to go back to control panel and adjust the axis once more.
All other apps and emulators work fine with controller.
edit: as Ichinisan suggested, I went to windows control panel to check if all the axis were centered. In fact in one of the controllers it wasn't. So I adjusted it and started zsnes again and it worked. That's the solution. The next day didn't work again, but I just had to go back to control panel and adjust the axis once more.