Hello,
continuing from my previous post:
http://board.zsnes.com/phpBB2/viewtopic.php?t=13119
..which was completely ignored (have people given up on this brilliant project?)
I now have zsnes 1.51 running on Debian Lenny linux using the framebuffer, on a console using a Matrox G400 video card! And it runs brilliantly - better than I've ever seen it - no tearing, smooth as heck scrolling and it's just lovely basically.
<columbo>There's till just one small problem...</columbo>
..and that is when the process ends (I.E. I press escape) it doesn't finish properly and I have to CTRL+C (or control and something - I always forget). It prints out something along the lines of FLAGS x00000001
So, can anyone help with this one? I'm so close to getting this nicely integrated with Advancemenu!
thanks,
m
ZSNES on arcade machine (framebuffer)
Moderator: ZSNES Mods
-
- New Member
- Posts: 2
- Joined: Fri Nov 06, 2009 11:31 am
Re: ZSNES on arcade machine (framebuffer)
Yes, I got it running (real nice as well). The only problem I had with it was the crashing when exiting.
Have you had any luck running zsnes (I left my brains in the womb) at 15Khz?
Have you had any luck running zsnes (I left my brains in the womb) at 15Khz?
Re: ZSNES on arcade machine (framebuffer)
I left my brains in the womb? Let's try that again:
Have you had any luck running zsnes at 15Khz?
Have you had any luck running zsnes at 15Khz?
-
- New Member
- Posts: 2
- Joined: Fri Nov 06, 2009 11:31 am
Re: ZSNES on arcade machine (framebuffer)
Nope, I quit trying it several months ago.
Best Regards.
Eric
Best Regards.
Eric